DFI SB630-CRM - Manual (Page 65)

65
2
Hardware Installation
3. While supporting the mounting screw at the bottom, from the top side of the
board, fasten a bolt into the screw.
Bolt
4. The SDVO connector is located at the bottom of the daughterboard. Grasp-
ing SDVO-LVDS by its edges, position it on top of the motherboard’s SDVO
connector with its mounting holes aligned with the bolts on the motherboard.
This will also align the SDVO connector of the two boards to each other.
SDVO connector on the
daughterboard