Element continuous controller setup, Controller menu – Flowserve SPECTORcontrol User Manual
Page 56
56
– continued –
3-element continuous controller setup
1.
Press button
Continuous controller
in the menu
3-element controller setup
.
2.
The name of the controller is highlighted in
yellow.
3.
The green input fields
Steam flowrate
,
Water flowrate
and
Level
show the ad-
justed signals. Click in the input field to
show all established signals.
4.
Select the signal that indicates the re-
quired parameters. For more information
on the setup and configuration of the
equipment see menu
CAN Input
and
An-
alog Input
.
5.
The green input field
Rating
shows the adjusted value. To change the value click in
the input field. The value rates the influence of the difference between steam and wa-
ter flowrate on the measured level signal.
6.
The current value appears in the input mask. Use the on-screen keyboard to over-
write or modify the value.
7.
To toggle between internal and external setpoint press button
Internal setpoint
/
Ex-
ternal setpoint
.
8.
To enter the signal for an external setpoint click in the green input field. All estab-
lished sensing elements will be indicated.
9.
Select the signal that indicates the required parameters. For more information on the
setup and configuration of the equipment see menu
CAN Input
and
Analog Input
.
10. The green input field
Manip. variable
shows the manipulated variable element. To
select a signal for the manipulated variable click in the green input field. All adjusted
signals will be indicated.
11. Select the controller signal to which the manipulated variable shall be sent. You will
find more information on equipment setup in the menu
Analog Output
.
12. The green input field
Position
shows the position indicator. To select a position feed-
back signal click in the green input field. All adjusted signals will be indicated.
3-element continuous
controller setup
Logo
NC
Name
Steam flowrate
Water flowrate
Rating
Level
Int. setpoint
NC
NC
NC
NC
0.000