Burner set-up, Fuel, Burner menu – Flowserve SPECTORcontrol User Manual
Page 77
77
– con tinued –
Burner set-up
To set up the burner press button
in the menu
Burner
.
The display field shows the adjustable data of the burner.
■
To select the used fuel press button
Fuel
.
■
To adjust the limits of operating hours or to
reset current values press button
Operating
hours
.
■
To adjust temperature setpoints press button
Setpoint
.
■
To parameterise the capacity controller
press button
Capacity controller
.
■
To show or edit the current values of the
start-up counter press button
Start-up
counter
.
■
To synchronise the time press button
Set time
.
■
To configure the controller press button
Operating mode
.
Fuel
1.
In the menu
Burner Set-up
press button
Fuel
.
2.
To change the adjusted fuel click in the
green input field. The display alternates
between oil and gas. To confirm your entry
press button
.
Burner
Set-up
Logo
Operating hours
Setpoint
Start-up counter
Set time
Fuel
Operating mode
Capacity controller
Fuel
Logo
Name of parameter
Current fuel
Fuel selection
of the AZL
AZL values
Input