HP Velotechnik trikes - Manual (Page 102)

98
Service plan
Service plan
part work
lighting system
check function
adjust headlamp and rear light, check cable contacts
clean reflectors, replace missing reflectors
tires check air pressure
check tread and sidewalls
brakes check for damages
check for leaking oil
check rigid feel brake lever blades when pads reach rotor
check brake pads for wear
suspension element clean and oil thread, push rod, air chamber
lubricate bushes
replace worn out parts / hydraulic cartridge
suspension struts front check shock boot and clean stanchion tube
(not for Scorpion, Scor- disassemble, lubricate
Gekko, Gekko fx and
check for play
Gekko fx 26) replace worn out parts
rear swing arm check function and bearing play, tighten axle screws
bottom bracket bearings check bearing play
rims
check wall thickness, wear, condition
chain grease and check for wear
chain tubes check for wear
expand ends or exchange tubes
chain roller check for wear, check bearing
crank check, tighten
paintwork conserve and repair
wheels check alignment and spoke tension
handlebar check for damage / bends
check track rod for proper mounting
headset no headset used on full suspension models (service suspension strut bearings in-
hubs check bearing play and brake discs mounting
pedal check bearing play, check binding mechanism
frame check clamping of the front boom
clean and conserve
check for damage, damage to paintwork
quick release check correct closing
derailleur check for movement and function
clean and lubricate
screws and nuts check and tighten
mudguards check for damage and correct position
valves check for correct position and air tightness
stem check clamping
check clamping screws
cables dismount, lubricate, replace if necessary