HP Velotechnik trikes - Manual (Page 18)

Safety instructions (S-Pedelec)
14
Parts with no exchange restrictions are the
following:
x gearing system, chain rings, sprockets
x cranks
x pedals (with reflectors incl. design approval)
x grips
x tubes
Danger! If any part is deformed
(e.g. due to an accident or overload), espe-
cially frame, knuckles, handlebar, seat
mountings, pedals, cranks and brakes, it is
not allowed to use it any further or repair
it. Do not try to straighten bent parts. You
must replace them for your own safety. If
you do not replace a damaged part it can
result in a total failure of the part and you
may be seriously injured!
There is a “anti-manipulation label” mounted
to the vehicle which contains information
about some of the components that were de-
fined during the process of design approval.
This label must not be removed!
Identification- and anti manipulation plate
Identification plate
There is a identification plate fixed to the
frame which contains the most important in-
formation about vehicle and manufacturer.
This plate must not be removed!
Added parts and accessories
Additional accessories may invalidate the op-
erating licence or impair the function of your
S-Pedelec. This may also be valid for accesso-
ries and parts that are not in the category of
parts that can only be exchanged with parts
identical in construction. Before mounting
parts and accessories, it is recommended to
contact your bicycle dealer or a vehicle ex-
amination organisation (like TÜV, Dekra,
GTÜ...).