Johnson Amplification J-STATION - Manual (Page 17)

Deep Level Editing
Select a Preset which will be your starting point by rotating the Data knob. Once you have selected a
Preset, every aspect of the sound can be edited in the Deep Level edit mode.To access the Deep Level
editing, press and hold the Shift button for 3 seconds.The Shift button will begin to blink and the word
edit will briefly scroll across the display.Then the Display will show a number between 0 and 39 which
corresponds to the 40 different Parameters available for adjustment. Use the Effect Type (<) button to
select the previous Parameter number, and the Tap-It (>) button to select the next Parameter number.
Once the desired Parameter has been selected, the Display will alternate between showing the selected
Parameter number, and the value for the Parameter. Rotate the Data knob to change the value of the
selected Parameter. The following charts list every Parameter, the corresponding Parameter number, and the
possible values for each parameter.
Parameter
Compressor
On/Bypass
Threshold
Ratio
Gain
Frequency
Parameter Number
00
01
02
03
04
Parameter Values
00 = Bypass
01 = On
0 to 50 = -50dB to 0dB
00 = 1.1:1
01 = 1.2:1
02 = 1.5:1
03 = 2:1
04 = 3:1
05 = 4:1
06 = 6:1
07 = 8:1
08 = 10:1
09 = infinity:1
00 to 30 = 0dB to 30dB
00 = 50 Hz
01 = 63 Hz
02 = 80 Hz
03 = 100 Hz
04 = 125 Hz
05 = 160 Hz
06 = 200 Hz
07 = 250 Hz
08 = 315 Hz
09 = 400 Hz
10 = 500 Hz
11 = 630 Hz
12 = 800 Hz
13 = 1 kHz
14 = 1.25 kHz
15 = 1.6 kHz
16 = 2 kHz
17 = 2.5 kHz
18 = 3.15 kHz
19 = Full Range