Kleenmaid FE904C User Manual
Page 10
USING THE APPLIANCE FOR THE FIRST TIME
2.
USING THE APPLIANCE FOR THE FIRST TIME
After installation remove all notification labels (not grill or electrical warning labels), advertising, tape, packaging,
etc. A quick diluted wash with Ammonia and water should rinse away any adhesive residue. Eucalyptus oil (small
amounts) is also good for removing adhesive residue. Thoroughly rinse cleaned surfaces and wipe them dry using
a clean, soft cloth.
Before using the ceramic glass cooktop (FEC model only) clean it thoroughly with a suitable cooktop cleaner (e.g.
Hillmark Ceramic Cooktop Cleaner) and rinse with a clean, warm, damp cloth or paper towel. To avoid cooked on
cleaner residue, wipe the glass dry with a soft cloth or paper towel.
NOTE: People with sensitivity to cleaning chemicals must take the necessary precautions. St George recommends wearing
protective gloves while cleaning the appliance.
NOTE: Unless otherwise noted, the instructions for oven operation apply to the multi-function oven (left hand oven for
FED model).
2.1
Power On
The time is displayed in digital 24 hour format (e.g. 18:00 is 6:00 pm). When power is first applied the time of day
(0:00) and AUTO flashes in the display. Pressing the Reset button cancels power-up mode and automatically
places the unit in manual mode.
2.2
Burning In
Before cooking in the appliance an initial pre-heat is required to burn off the fine oil film used to protect the
elements during shipping. The first time you heat up the oven (or grill) the oil will be given off as smoke (some
smell may also be noticeable), which is perfectly normal.
1.
Set the Clock Timer for manual operation by pressing the Reset button.
2.
Select Fan Oven on the mode switch and set the oven temperature to 180
°C.
3.
With the oven door closed, leave the oven on for approximately 1 hour or until the smoke has disappeared.
4.
Change the selection on the mode switch to Fan Grill and leave for a further 20 minutes or until the smoke
has disappeared.
8