Kleenmaid FE904C User Manual
Page 46
CLEANING AND MAINTENANCE
5.6
Self Clean Oven Liners
An Optional Self Clean Oven Liner Kit is available as an accessory which,when fitted into the oven, catalyses
cooking fats which come into contact with their surfaces during oven operation.The fats burn and flake to the
oven floor so a quick brush out when the oven is cool is all that’s required. The non-liner surfaces in the oven can
then be wiped down for brilliantly simple results. For extra cleaning action, heat the empty oven at 230
°C for 15
to 20 minutes.
Be very careful not to scratch the surfaces of the liners. Large spills should be removed by sponging the liners
using warm water and a soft sponge. If large areas of the catalytic coated liners are covered with cooking fats the
self cleaning action may not be as effective. The catalytic liners can be cleaned by removing them from the oven
and rinsing with clear hot water only. Cleansing agents or oven cleaners must never be used on the self-clean
liners.
5.7
Changing the Light Globe
The oven illumination lamp/s are located in the side wall/s of the oven compartment/s. The light globe is located
behind the glass cover and is a screw-in type.
Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
To change a light globe:-
1.
Gently lever out the glass cover from the rear edge.
2.
Unscrew the light globe and screw in a replacement globe.
3.
Replace the glass cover making sure it fits correctly into place.
44