Kleenmaid FE904C - Manual (Page 17)

CONTROL PANEL OPERATION
3.11 BBQ Grill Controls (FED model only)
The electric BBQ grill has individual controls for the front and rear grill zones to select the heat desired for
cooking. The controls may be turned in either direction. The indicator lights above the controls glow when the
corresponding element zone is operating.
3.12 Roast Probe Operation
WARNING: This mode of cooking is suitable only for Normal Oven, Classic Bake, Fan Assist, Fan Oven or High Bake
modes. Use of the probe sensor in either Grill or Fan Grill modes will damage the probe.
The roast probe operation shares the same digit display as does the timer functions and operates only in the main
oven. The roast probe must be plugged into its socket within the oven compartment to display the current
temperature of the roast probe sensor in the left-hand pair of digits. The Roast Probe Set Temperature (RPST) will
be displayed in the right hand pair of digits and can be adjusted by pressing the
or buttons.
NOTE: The RPST can be set between 0
°C and 99°C, however, it is not recommended to set the RPST above 85°C as this
gives inconsistent results and may result in the burning of food.
Once the temperature of the roast probe’s sensor reaches or exceeds the RPST the oven will automatically turn
off and the alarm will sound. The alarm can be cancelled by pressing any of the 4 left-hand buttons. If not
manually cancelled the alarm will self cancel after a few minutes. To cancel the roast probe function, remove the
roast probe from its socket.
For complete details refer to Roast Probe Cooking.
NOTE: Whenever the roast probe is plugged in, the RPST is re-set to 80
°C.
The time is not displayed when the roast probe is plugged in. If the roast probe is disconnected the display
reverts back to the time of day.
Automatic programmed cooking can be used with the roast probe.
<
<
15