Kleenmaid FE904C User Manual
Page 58
SERVICING AND MINOR ADJUSTMENTS
9.
SERVICING AND MINOR ADJUSTMENTS
9.1
Thermostat Adjustments
The oven thermostat is factory set and calibrated over the whole temperature range and is not adjustable.
9.2
Setting Gas Pressure
A pressure test point is provided on the pressure regulator (for Natural Gas models) or on the inlet adapter (for
LPG models) at the gas connection point of the appliance. The pressure should be set with one burner fully on.
The set pressure should be 1 kPa for Natural Gas or 2.75 kPa for LPG.
9.3
Gas Simmer Flame Adjustment
The minimum gas flow for each burner is factory set but can be adjusted if necessary. The minimum flow can be
increased or decreased by removing the control knob and:–
For all models, turning the adjustment screw in the centre of the control shaft using a small flat bladed screw
driver. Take care not to damage the head of the screw.
Pressure test
Point
Pressure Adjustment
Screw
By pass
Screw
Adjustment
Via
Centre
Shaft
56