Kiddy World plus - Manual (Page 12)

Vehicle Lap belts forward of the vehicle
seat bight (intersection of the vehicle seat
back and vehicle seat cushion) (Fig. 6)
4.3 Vehicle lap and shoulder belts with a free sliding latch plate
Vehicle lap and shoulder belts with a free sliding latch plate may be used in
with both the Toddler Car Seat and Booster Car Seat.
For use with Toddler Car Seat
This type of lap and shoulder belt may be used to secure the Toddler Car
Seat if the lap portion of the vehicle seat belt can be tightened to be snugly
adjusted around the protection shield and will stay snugly adjusted while
traveling. Two types of lap and shoulder belt systems with a free sliding latch
plate shown below are common in vehicles and require specific steps to use
to secure the protection shield and the child. Check your vehicle owner’s
manual for the type of lap and shoulder belt system in the vehicle.
Lap and shoulder belt with Emergency Locking Retractor (ELR) on the
shoulder belt.
A shoulder belt with an ELR only locks the belt in a sudden stop or crash.
The shoulder belt can be extended and retracted all the way without locking.
A shoulder belt with ELR requires installation of a locking clip to lock the belt
so that is stays snugly adjsusted around the Toddler Car Seat. See the
information in the “locking Clip Installation and Use” section on how to install
and tighten the locking clip.
11
Fig. 6