Kiddy World plus - Manual (Page 13)

12
For use with Toddler Car Seat
- This type of lap and shoulder belt may be used with the Booster Car Seat
to secure the child.
- Always read and follow the information provided in the vehicle owner’s
manual for the use, positioning and adjustment of the vehicle seat belt.
Locking Clip Installation and use
You MUST use locking clip provided with this car seat with a vehicle belt that
slides freely through the latch plate or if the lap portion of the lap/shoulder
belt can not be tightly secured.
• Install car seat forward-facing on vehicle seat, route
the lap belt around the protection shield and snuggly
adjust the vehicle lap belt around the protection shield
and child.
• While holding vehicle lap and shoulder belts together
at the latch plate (Fig. 7), unbuckle vehicle belt.
Avoid serious injury or death:
• Failure to use locking clip where required will result in car seat not
being securely held in place.
• Remove locking clip from vehicle seat belts when not being used
with car seat.
• DO NOT use locking clip as a vehicle seat belt shortener.
DEATH or SERIOUS INJURY can occur
WARNING
!
Fig. 7