Kiddy World plus - Manual (Page 40)

39
Open the two flaps at the back of the headrest and pull the back cover out
from around the yellow height adjustment handle.
Free the cover also around both shoulder belt guides. Next, pull the sides of
the cover off the headrest by pulling toward the front of the car seat.
9.2 Removing the backrest cover
Open the 2 snap fasteners at the top front corners of the backrest. Then
open the two flaps at the back. Pull the cover forward to remove.
9.3 Removing the seat cover
To be able to remove the seat cover, open the two locks on the back and on
the bottom of the seat. The seat cover can also be removed in a forwards
direction.
9.4 Protection shield cover
The protection shield cover may not be removed for washing - surface
washing only. Please consult your retailer or manufacturer if the protection
shield or its cover is damaged.
9.5 Replacing the covers
To replace the covers, follow the steps for removing the covers in reverse
order (see sections 9.1 – 9.3).
10. Instructions for care and cleaning
10.1 Washing the covers
The covers - except protection shield cover are machine washable
in cold water and mild soap on the delicate cycle.