Kiddy World plus - Manual (Page 20)

Fasten the hook on the vehicle top tether
anchor by placing the flat spring over the
vehicle tether anchor, Press down (Fig. 21;
No. 1) and pull back (Fig 21; No. 2).
Check that the hook is closed and the belt is
not twisted.
Make sure that the back of your car seat is
resting against the vehicle's seat back.
Tighten the top tether belt to remove all the
slack by pulling the free end of the top
tether belt toward the car seat (Fig. 22).
Attach lower anchor belt and LATCH connectors:
Attach the LATCH connectors to the vehicle
LATCH lower anchorage between seat and
backrest of the vehicle's seat with red
release button facing away from car seat,
slide LATCH connector onto vehicle anchor
(Fig 23; No. 1).
You should hear a "click" when the
connector locks onto the anchor.
Check that the LATCH connector is correct-
ly secured by pulling out on the connector.
19
Fig. 21
Fig. 22
Fig. 23