Securing your child – Kiddy World plus User Manual
Page 26
25
Securing your child:
Open the protection shield by releasing the Protection shield buckle and
rotating the protection shield out and to the side of the car seat.
Place your child in the car seat, making sure
that child's back is contacting the backrest.
Check to see that the seat cushion and
headrest are adjusted to the size of your
child (section 5.1.1 and 5.1.2).
Secure the child by placing the protection
shield in front of the child with sides in the
protection shield slots and slide the
protection shield back so that it rests
comfortably against your child's torso
(Fig. 33).
Pull the vehicle’s lap and shoulder belt over
the protection shield and lock the vehicle
buckle
tongue
in
the
vehicle
buckle
(Fig. 34). Make sure that the belt tongue
locks securely in place with a noticeable
“click” and check it by pulling on the belt.
Slide the lap belt completely into the red belt
guide on both sides of the protection shield
(yellow arrows in Fig. 34).
NOTE: Position the lower LATCH anchor
belt so that it doesn't interfere with the
lap/shoulder belt routing.
Snuggly adjust protection shield around
your child.
Make sure that the protection shield sits
comfortably against the child's torso, and
once you are happy with how the protection
shields sits, tighten the lap belt by pulling
gently on the shoulder belt (Fig. 35).
Fig. 33
Fig. 34
Fig. 35