Check for proper shoulder belt fit – Kiddy World plus User Manual

Page 35

Advertising
background image

34

Then pull the vehicle’s lap and shoulder belt
out and place under the arm rest on the
vehicle seat belt buckle side. Buckle vehicle
seat belt listening for an audible "click"
(Fig. 51; Step 6).
Check that vehicle belt is locked by pulling
on lap and shoulder belt.

Make sure that the vehicle’s belts are not
twisted and lie snuggly along the body of
your child.

Snuggly adjust lap and shoulder belt around
child.

Pull on vehicle shoulder belt to tighten
vehicle's lap belt (Fig. 52; Step 7) and then
pull the vehicle shoulder belt (Fig. 52;
Step 8) in the direction of the shoulder belt
retractor.

Check for proper shoulder belt fit:

- for proper lap and shoulder belt fit, the lap belt must be snuggly adjusted

low on hips, contacting thighs and shoulder belt must be through the red

belt guide located at or above the shoulder and snuggly adjusted to contact

chest and be centered on shoulder.

- The headrest can be adjusted to properly position the shoulder belt on

your child according to his or her size.

- Adjust the headrest up or down position the shoulder belt guide above the

shoulder and center the shoulder belt on child's shoulder (see below).

Fig. 51

Fig. 52

Advertising