Kiddy World plus - Manual (Page 25)

Adjust the vehicle seat back into the upright position or the recline
adjustment
specified in the vehicle owner’s manual.
The back of the car seat must be in contact with the vehicle seat as descri-
bed in “Vehicle seat back and Headrest adjustment” section.
Attaching and adjustment of top tether:
If not using top tether to secure car seat, store tether and go to “Securing
your child” section.
Lengthen the top tether belt by pushing the
adjustment button and pulling on tether
hook.
Fasten the hook on the vehicle top tether
anchor by placing the flat spring over the
vehicle tether anchor, Press down (Fig. 31;
No. 1) and pull back (Fig 31; No. 2).
Check that the hook is closed and the belt is
not twisted.
Make sure that the back of your car seat is
resting against the vehicle's seat back.
Tighten the top tether belt to remove all the
slack by pulling the free end of the top
tether belt toward the car seat (Fig. 32).
24
Fig. 31
Fig. 32