Dish Network DuoDVR 625 - Manual (Page 91)

Chapter 3
Page 86
Using the System
Press the FWD (“FORWARD”) button once to forward the
program four times as fast as normal play. Press the FWD button
twice to forward at 15 times normal speed, three times to forward at
60 times normal speed, and four times to forward at 300 times
normal speed. The on-screen bar shows how far you’ve gone.
Press the PAUSE button and then press the FWD button to forward the
program in slow motion. When you press the FWD button once the program
advances at 1/15 the speed of normal play. Press the FWD button twice to
forward at 1/4 as fast as normal play. Press the FWD button three times to play
the program.
Note : Of course, you can’t “forward” into the part of a “live” program that
hasn’t been broadcast yet.
Press the PLAY button to watch the program. Also, press this button to
switch from pause, forward, or reverse to play.
Press the SKIP BACK button to skip back about ten seconds in a
recorded program. Press this button again to skip back again.
Press the PAUSE button and then press the SKIP BACK button to
reverse the recording one frame at a time.
Press the SKIP AHEAD button to skip ahead about 30 seconds in the
program. Press this button again to skip ahead again.
Press the PAUSE button and then press SKIP AHEAD to advance the
recording one frame at time.
Press the VIEW TV button to catch up with the program as it’s showing now.
Recording a Program Now
When you record a program now:
• You can record a program that is on now or a future program to watch
later.
• You can pause, go back to play, reverse, skip back, fast forward, or skip
ahead through a recorded program.
• You can also use slow motion forward and backward, and frame
advance and reverse while using the DVR’s auto recording feature.
• You can play back a program you already recorded and record a new
program at the same time.
Note : If you record a locked program while you have the receiver locked,
you’ll have to enter the password to play back that program.