Dish Network DuoDVR 625 - Manual (Page 94)

Page 89
Using the DVR Features
• Press the FWD (“FORWARD”) button once to forward the
program four times as fast as normal play. Press the FWD
button twice to forward at 15 times normal speed, three times to
forward at 60 times normal speed, and four times to forward at
300 times normal speed.
• Press the PAUSE button and then press the FWD button to forward the
program in slow motion. When you press the FWD button once the
program advances at 1/15 the speed of normal play. Press the FWD button
twice to forward at 1/4 as fast as normal play. Press the FWD button three
times to play the program.
Note : Of course, you can watch any part of an event you’ve already
recorded.
• Press the PLAY button to play back or go on with a paused play
back. Also, press this button to switch from fast forward or reverse
back to normal play back.
• Press the SKIP BACK button to skip back about ten seconds in the
event. Press this button again to skip back again.
• Press the PAUSE button and then press the SKIP BACK button to
reverse the recording one frame at a time.
• Press the SKIP AHEAD button to skip ahead about 30 seconds in
the event. Press this button again to skip ahead again.
• Press the PAUSE button and then press the SKIP AHEAD button
to advance the recording one frame at a time.
• Press the STOP button to stop play back.
Play Back a Recorded Event and Record Another Event
1. Set up the receiver to make an on-demand recording.
Note : You can press the RECORD button or you can use any kind of
event timer except a VCR event timer.
2. Press the DVR button. This opens the DVR Events menu.
Tip: With the DVR
receiver, you can
even watch one
recorded event
while recording
another at the
same time!