MBM Corporation 45 - Manual (Page 11)

T10113 Mar 2000
2.3 Explanation of the menus, continues
After choosing “DIAGNOSIS” the display will show what
type of self test that is currently performed. During the
test you will hear sounds when components are tested.
NOTE: Before performing a diagnosis it is very impor-
tant to read “4.3 Diagnosis” in the section “4
Added Features”.
Mailer/inserter Model 45 Operator Manual 2-8
Normally the message “NO FAULTS FOUND” should
be displayed. Press the reset button ( ) to return to
the Added Features Menu.
If the self test program would find any errors the dis-
play will show the faulty component, its actual status
and a fault code. In case of multiple errors there will be
an arrow button and a cancel button visible. Scroll with
the arrow button and press the “ESC” button to return
to the Added Features Menu.