MBM Corporation 45 User Manual
Page 23
T10113
Mar 2000
WARNING:
DO NOT use the Model 45 if the following
test fails. No additional testing should be
performed. Call for service.
When testing the Ground Fault Interruptor (GFI ), the
Model 45 power cord must be connected to the wall
receptacle and the main power switch in the ON (1)
position.
•
Press the red ”TEST”- button.
•
Press the black ”RESET”-button. A red flag should
appear in the window of the GFI.
•
Press the red ”TEST”- button. The red flag should
disappear.
•
Press the black ”RESET”-button again. The Model
45 should now be ready to use.
red
button
window
black
button
Mailer/inserter Model 45 Operator Manual
5-3
envelope feed belts
Clean the envelope feed belts using a mild soap deter-
gent every 10 000 feeds or earlier if needed.
5.3 Cleaning the envelope feed belts
5.4 GFI function test and resetting