MBM Corporation 45 - Manual (Page 13)

T10113 Mar 2000
Mailer/inserter Model 45 Operator Manual 3-2
3.1 Setting up the Model 45 for different insert sizes, contin-
ues
oversize envelope adjustment knobs
shown in their outermost position
When B4 envelopes (extra wide) is used to
accomodate a large packing thickness, the oversize
envelope adjustment knobs should be set to their
outermost positions to aviod damages to the enve-
lopes. Loosen the knobs to adjust.
CAUTION • Only perform the adjustment when the
document table side guides are in their
outermost position.
NOTE • If B4 envelopes (extra wide) not is used,
the oversize envelope adjustment knobs
should be set to their innermost positions.
0 - 7 mm
position 5 - 12 mm
position
Depending on the actual packing thickness, the outfeed
rollers need to be adjusted. Open the outfeed cover and
position the two levers, one on each side, to the re-
quired position as shown in the figure.