Microcom 466 - Manual (Page 10)

Features and Specifications Chapter 1
466 Operators Manual 4
1.3 FONTS
! Bitmapped fonts (normal/bold and OCR-A and OCR-B)
! Converted HP LaserJet™ or TrueType® font compatibility
! Fonts can be printed with proportional or non-proportional spacing
! All bitmapped fonts expandable in height and width
! Printable in 0, 90, 180, and 270 degree rotations
1.4 PRINTING
! Optional peel function with take up motor and label present sensor
! Optional internal rewind
! Optional rotary cutter
! Batch and tag/tear mode advances label to the tear bar
! Label back-up prevents wasted media in tag/tear and peel modes
1.5 INTERFACE COMMUNICATIONS
! Serial: RS-232C, 25-pin female D-Sub connector (DCE) and 2Kbytes buffer
-Flow control: XON/XOFF, CTS/RTS
-Baud rate: 110 to 38400, user-selectable
-Parity: odd, even or none
-Data bits: 7 or 8
! Parallel (optional): 25-pin female (also includes additional serial port)
1.6 PHYSICAL
! Rigid painted steel construction
! Height: 12" (304.8mm)
! Width: 11" (279.4mm)
! Depth: 18" (457.2mm)
! Weight: 40 LBS (18.14Kg)
1.7 ENVIRONMENT
! Temperature: 0 " C to 40 " C operating
! Humidity: 10-85% non-condensing