Microcom 466 - Manual (Page 31)

Chapter 4 Designing Labels Using LDS
466 Operators Manual 25
TCI TEXT CONVERSION IDENTIFIER
This parameter determines what form the text string will be printed in. The following
values define which text conversion method is used:
1 Text (standard)
2 Text Surrounded by Asterisks
3 Text with UPC-A/UPC-E Checksum Digit Added
8 Downloadable Fonts and Graphics
12 UPC-A Bar Code
13 UPC-E Bar Code (SEND 11 DIGITS)
14 UPC-E Bar Code (SEND 7 DIGITS)
15 Interleaved 2 of 5 Bar Code
16 Code 3 of 9 Bar Code
*17 Text with UPC-E Checksum and Extended Bars Added
20 EAN-13 Bar Code
21 EAN-8 Bar Code
*22 Text with EAN-13 Checksum and Extended Bars Added
*23 Text with EAN-8 Checksum and Extended Bars Added
24 MSI 1 (Plessey)
25 MSI 2 (Plessey)
26 MSI 3 (Plessey)
*28 Text with MSI Checksum Added - Type 1
*29 Text with MSI Checksum Added - Type 2
*32 Text with UPC-A Checksum and Extended Bars Added
*33 Text with UPC-A With Extended Bars Added
36 Postnet (Zip+4)
37 Postnet (Zip+6)
38 Maxicode Bar Code
40 Code 128 Bar Code (Automatic Compression)
41 Code 128 Bar Code (Manual Compression)
42 Codabar Bar Code
43 Code 93 Bar Code
44 AS-10 Bar Code
46 PDF417 Bar Code
50 UCC/EAN-128 Bar Code
51 Text with UCC/EAN-128 Information
* Refer to Section 7.1.1 on how to use these TCI's.
Example: For the string - 1234567
A TCI of 1 would normally be used when printing regular text .
A TCI of 42 would print a Codabar bar code.