Microcom 466 - Manual (Page 54)

Printer Commands Chapter 5
466 Operators Manual 48
^A ^D Command
XX 75 Load Label Count: Tells the printer to print a batch of labels using the serial
number function if enabled. Can be used in conjunction with load copies count
(^D73, see section 5.3). The batch of labels will be printed when a ^D3 is
executed. Therefore, this must precede a ^D3 command. The only difference
between this command and ^D73 is in the ability of this command to increment
and decrement serial numbers in the batch.
A sample program using the single serial number feature:
^D57?
1?
1,416,25,2,1,6?
^D56?
^A2^D86?
^A1^D84?
^A5^D85?
^A3^D75?
^D2?
20?
^D3?
A sample program using the multiple serial number feature:
^D57?
3?
1,400,25,4,1,6?
2,100,75,4,1,6?
3,100,125,4,1,6?
^D56?
^A2^D88?
^A1^D88?
^A3^D89?
^A3^D75?
^D2?
100?
200?
300?
^D3?