Microcom 466 - Manual (Page 88)

Quick Reference Command Summary Appendix B
466 Operators Manual 82
^A ^D Command
2 Text string entry mode: Precedes the text strings that are supplied to the
various fields in the label (Equivalent to ^B).
3 Print Command: Prints a single label or starts the printing of a batch of labels.
(Equivalent to ^C)
5 Send Printer Status: (Equivalent to ^E)
11 Print a Test Label: (Equivalent to ^K)
12 Print a Blank Label: (Equivalent to ^L)
13 Rewind Motor Control: Enables or Disables the internal rewind motor.
0 Enable
1 Disable
14 Cutter Control: Enables or Disables the paper cutter. (This command is
included for compatibility reasons only. Use the ^D99 command for new
formats.)
0 Enable
1 Disable
20 Bits per Second (COM2): This sets the data rate of the optional 2 nd serial port.
0 300 bps
1 600 bps
2 1200 bps
3 2400 bps
4 4800 bps
5 9600 bps
6 19200 bps
7 38400 bps
21 Change SW1: Change software switch bank #1.
12345678
^ABxxxxxxxx
*******.) 1=XON/XOFF Enable, 0=Disable (COM1)
******.)) 1=Send Status Message on Error (COM1)
*****.))) 1=Echo Enable, 0=Disable (COM1)
****.)))) 1=Send Status Message on Error (COM2)
***.))))) Always 0
**.)))))) 1=Ignore Control Codes, 0=Accept (COM1,COM2
** and LPT1)
*.)))))))))),
.)))))))))),* Status Message Format (COM1 and COM2)
00 = Control Codes
10 = Text Equivalent
11 = ^ Equivalent