Microcom 466 - Manual (Page 96)

466 Operators Manual 90
APPENDIX C: HARDWARE DIP SWITCHES (on rear panel)
Hard Switch 1
123456 78
xxxxxx xx
****** *.) Parallel Board Jumper Status (Must be 0 when using
****** *
firmware versions 1.65 and higher)
****** .)) 1=Parallel Board Detected
******
*****.)))0=No Parity, 1=Enable Parity (COM1)
****.))))0=Odd Parity, 1=Even Parity (COM1)
***.)))))0=8 Data Bits, 1=7 Data Bits (COM1)
**.)))))))),
*.)))))))),*
.)))))))),** Bits per Second (COM1)
000 300 bps
100 600 bps
010 1200 bps
110 2400 bps
001 4800 bps
101 9600 bps
011 19200 bps
111 38400 bps