MovinCool 24HFU Service Manual - Manual (Page 6)

MOVINCOOL 24HFU / 24HFU-1 SERVICE PAGE 6
CONSTRUCTION AND SPECIFICATIONS
■ Specifications
ITEM/MODEL 24HFU 24HFU-1
[Rating Condition] DB 35˚C WB 28.2˚C DB 35˚C WB 28.2˚C
95˚F 83˚F 95˚F 83˚F
RH 60% RH 60%
[Features]
Power frequency ___________ (Hz) 60 60
Line voltage ______________ (Volt) Single phase 230 Single phase 230
Power consumption ________ (Kw) 3.1 3.1
Current consumption _______ (Amp) 14.0 14.0
Power factor ______________ (%) 96 96
Starting current ____________ (Amp) 62 62
Power wiring ______________ (AWG) 12 (3-core) 12 (3-core)
[Cooling Unit]
Cooling capability __________ (Kcal/h) 6,000 6,000
________________________ (Btu/h) 24,000 24,000
Cooling system Direct expansion Direct expansion
[Blower]
Type of fan Centrifugal fan Centrifugal fan
Condenser - Air flow ________ (ft 3 /min) 1,200 1,200
Evaporator - Air flow ________ (ft 3 /min) 706 706
Motor output ______________ (Kw) 0.55 0.55
[Compressor]
Type Hermetic scroll Hermetic scroll
Output ___________________ (Kw) 1.6 1.6
Refrigerant type R-22 R-22
Refrigerant amount _________ (kg) 0.85 0.85
________________________ (lbs) 1.87 1.87
[Safety Device]
Compressor overload relay With With
Fan motor protector With With
Drain switch With With
Anti-freezing thermostat With With
High pressure switch With With
Restart relay - power interruption Without With
Time delay relay Without With
[Dimensions and Weight]
W x D x H ________________ (mm) 490 x 730 x 1200 490 x 730 x 1200
________________________ (inch) 19.3 x 28.7 x 47.2 19.3 x 28.7 x 47.2
Weight ___________________ (kg) 107 107
________________________ (lbs) 235 235
[Operating Conditions]
Intake air temperature range 45˚C (113˚F), RH
≤
50% 45˚C (113˚F), RH
≤
50%
to 25˚C (77˚F), RH
≥
50% to 25˚C (77˚F), RH
≥
50%
[Control Device]
Temperature control Without With
Specifications are subject to change without notice.