Niveo Professional NGSME16T2H - Manual (Page 244)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 244
Power over Ethernet Configuration
Feature Command Line
PoE Configuration
PoE Configuration Syntax:
PoE Mgmt_mode
[class_con|class_res|al_con|al_res|lldp_res|lldp_con]
Parameters:
class_con : Class + Actual Consumption
class_res : Class + Reserved Power
al_con : Allocation + Actual Consumption
al_res : Allocation + Reserved Power
lldp_con : LLDP-MED + Actual Consumption
lldp_res : LLDP-MED + Reserved Power
Example:
PoE>mgmt class_con
PoE Power Supply
Configuration
(Warning: The default
value is for reference
only. If the value is
not comfort to your
product specification,
please give the
correct value before
you start using PoE
function.)
Syntax:
PoE Maximum_Power [<port_list>] [<port_power>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<port_power>: PoE maximum power for the port (0-15.4 Watt
for PoE mode, 0-30.0 Watt for PoE+ mode)
Example:
PoE>max 1-24 10 (Max. power of Port 1-24 to 10Watt)
PoE>max 1-24 15.4 (Max. power of Port 1-24 to 15.4 Watt)
PoE Port
Configuration
Syntax:
PoE Mode [<port_list>] [disabled|poe|poe+]
Parameters: