Niveo Professional NGSME16T2H - Manual (Page 260)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 260
sFlow Configuration
Feature Command Line
sFlow Configuration
Receiver
Configuration
Syntax:
sFlow Receiver [release] [<timeout>] [<ip_addr_host>]
[<udp_port>] [<datagram_size>]
Example:
sFlow>receiver 10 192.168.2.100 6343 1400
Result:
Receiver Configuration:
=======================
Owner : <none>
Receiver : 192.168.2.100
UDP Port : 6343
Max. Datagram: 1400 bytes
Time left : 0 seconds
Receiver Release sFlow>receiver
Port Configuration Syntax:
sFlow Receiver [release] [<timeout>] [<ip_addr_host>]
[<udp_port>] [<datagram_size>]
sFlow FlowSampler [<port_list>] [<sampling_rate>]
[<max_hdr_size>]
sFlow CounterPoller [<port_list>] [<interval>]
sFlow Statistics Receiver [clear]
sFlow Statistics Samplers [<port_list>] [clear]
Example:
sFlow>flow 1-2 10 128 (Enable FlowSample on port 1-2,