Niveo Professional NGSME16T2H - Manual (Page 303)

Chapter 5: Monitor, Diagnostic, Maintenance
Monitor, Diagnostic, Maintenance
NGSME16T2H User Manual | 303
State
The current state of the server. This field takes one of the following values:
Disabled: The server is disabled
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did not
reply within the configured timeout. The server has temporarily been disabled, but
will get re-enabled when the dead-time expires. The number of seconds left before
this occurs is displayed in parentheses. This state is only reachable when more than
one server is enabled.
Buttons
Auto-refresh: Click this box to enable an automatic refresh of the page at regular
intervals.
Refresh: Click to refresh the page immediately.