OnLine Power Battery Backup System - Manual (Page 47)

OLP
Three Phase UPS Systems
5. LCD DISPLAY
The password is a 4 digit number which can be changed upward or downward by
the UP( ↑ ) or the DOWN( ↓ ) key, and can be confirmed by the ENTER(← ┘ )
key. The selection will continue if the correct password is entered, or will go back
to MENU 0, the MAIN MENU, if no correct password is entered after 3 trials.
The password for entering the < PARAMETER SET > menu is 1-2-3-4. The
entering of MENU 12, the OTHER SETTING menu, is permitted by another
password, to be used by maintenance personnel. Users can obtain this password
from the manufacturer for user’s maintenance technicians.
If “EXIT” is selected (blinking instead of pointed by cursor), the screen will
return to MENU 0.
5.3. Menu 2 – Status / Warning Menu
This menu is displayed when STATUS/WARN/FAULT is selected from MENU 1.
The left hand side of this menu shows the real time status of the rectifier, inverter
and static switch. The right hand side shows the warning or fault conditions. if
any. Therefore, under normal conditions, the LCD display should be exactly as
shown above. When minor abnormal conditions occur, these will be shown under
the title < WARNING >. These will be overridden by a fault message if more
serious abnormal conditions occur, and the title < WARNING > will change to <
FAULT >. For example, if short circuit occurs at the output, this screen will
display the following:
＜ S T A T U S ＞ ＜ F A U L T ＞
R E C T I F I E R = O N S H O R T C I R C U I T ！
I N V E R T E R = O F F
L O A D O N I N V E R T E R
L O A D O N I N V E R T E R
＜ S T A T U S ＞ ＜ WARN I N G ＞
R E C T I F I E R = O N
I N V E R T E R = O N
5-3