OnLine Power Phase Stabilizer - Manual (Page 67)

OnLine Power
6002-032 REV H 4-4
4-3 THERMAL REMOTE EMERGENCY POWER OFF STATION
The Thermal REPO is a wall mounted unit that functions as a dual temperature warning and shutdown monitor.
The first and second stage over temperature settings are field selectable. The Thermal REPO provides a
contact closure for the first stage alarm, and a unit shutdown interface for the second stage over-temperature
response. In addition, the Thermal REPO displays the ambient temperature on a 3-digit display.
The Thermal REPO station is designed to be vertically mounted at eye level or slightly lower. It can be located
anywhere an emergency shut-off is required. The Thermal REPO is provided with a 50-foot (15 m), three-
conductor cable. Longer cables are available in five-foot increments up to 100 feet (30 m).
Thermal REPO Specifications:
• Temperature
range
• Dimensions
• Weight
4-3-1 Installation for Thermal REPO
The Thermal REPO cable will be 50 to 100 feet (15 - 30 m) long depending on length ordered. The cable is
supplied with bare wires on the both ends. The bare wire ends connect to the terminals inside the Thermal
REPO enclosure.
GND
+24VDC
SHUNT TRIP
WHITE
BLACK
RED
1
2
14
12
TWO-STAGE
THERMO
REPO SWITCH
JUMPER 1 & 12
THERMAL REPO WIRING
ILLUSTRATION 4-3