Viewing a network camera – OpenEye OE-C7163 User Manual
Page 25
26
1.
To view a network camera over the web using the camera’s viewer software,
double-click the name of the camera.
2.
Click
Browse
.
3.
Enter the
Username
and
Password
for the camera. The username and
password are case sensitive. It is strongly recommended that the password be
changed after the initial setup to prevent unauthorized access. The default
username and password for OpenEye IP cameras are as follows.
Username
– admin
Password
– 1234
4.
The viewer software is now opened in Internet Explorer.
The viewer software will install automatically the first time you connect to
the camera. If your internet browser does not install the viewer software,
check the security settings or ActiveX controls and plug-in settings. If your
internet browser asks for permission to install the ActiveX control, you must
allow the ActiveX control to continue the installation. If you are prompted to
allow an add-on, click
Allow
.
5.
You can now configure your camera using the Viewer Software. For more
information on using Viewer software, please see the user manual for your
camera.