OpenEye OE-C7163 - Manual (Page 34)

31186AE 35
Camera Tab
Use the Camera Tab section to modify picture settings for the camera. The sample image
will change as you modify the picture settings.
These settings can drastically affect the camera image. OpenEye suggests
that these settings are only modified by a CCTV professional, or at the
instruction or a technical support representative.
Min Shutter Speed
–
Choose a pre-determined
shutter speed.
Manual Mode
–
Changing the shutter mode to
manual will allow you to select the minimum
shutter speed that the camera will use. This can
drastically change the amount of light entering the
camera.
Click Set to save your changes.
Use the white balance setting to change color representation in difficult lighting conditions.
Auto
–
White balance works within its color temperature range and calculates the best-fit
white balance.
ATW – Auto-tracing white balance, the camera removes the signals within a range of
2000K to 10000K, which helps to even out the bright white portions of an image.
One Push – Balances color temperature based on a white object within the viewing area.
Manual
–
Change the white balance value by specifying the R grain and B grain.
Click Set to save your changes.