OpenEye OE-C7163 - Manual (Page 35)

36
Each of the Picture Adjustment settings is set to the recommended default.
Brightness – Adjust the image ’s brightness on the camera. The Backlight value
is adjustable from 0 (dim) ~ +20 (brightest).
Sharpness
–
Increasing the sharpness level can make the image looked
sharper; it especially enhances an object
’s edge. The value of sharpness is
adjustable from 0 ~ +10 (sharpest).
Contrast – Adjust the contrast value from -6 to 19 .
Saturation
–
Adjust the color saturation form -6 to 19 (most saturation) .
Hue
–
Adjust the hue from -12 to 13 .
Backlight – Backlight compensation can correct for overly-bright backlit
scenaries.
D-WDR Function – Turn the Digital Wide Dynamic Range Off, or adjust between
1 and 3 .
Click Set after making changes to the Picture Adjustment settings to save the settings and
update the Live screen.
Motion Detection
Use the Motion Detection menu to configure the
motion detection window(s). Here, Motion
Detection can be turned On or Off, and other
general settings can be specified.
To enable motion detection:
1. Use the Motion Detection dropdown to
select a motion detection preset (1-4). If
choosing an additional preset after 1,
check the
On checkbox.
A motion detection preset can be
turned
Off at a later time.
2. If desired, check the By Schedule check box and use the dropdown menu to
select a schedule.
3. Designate the Motion Detection Setting values.
4. Check the appropriate boxes to designate the Trigger Action .
5. Click Save .