Get ip an address automatically (dhcp), Use static ip address – OpenEye OE-C7163 User Manual

Page 31

Advertising
background image

32

The camera comes preconfigured with a fixed IP address, selecting

Get IP address

automatically

requires a router or DHCP server to assign an IP address to the camera.

Every network device has a unique Media Access Control (MAC) address
that can be used for identification. The MAC address is located on the
bottom of each camera, and on the box label (OpenEye Network Camera
Manager also displays the MAC address for identification). Record your
camera’s MAC address for identification in the future.

To set up a new static IP address:

1.

Select the Use static IP address option.

2.

Type a new IP address in the

IP address

box.

3.

Type a new address in the

Default Gateway

box.

4.

Click

Apply

to confirm the new setting.

When using static IP address to log in to the IP Camera, you can access it either through
OpenEye IP Finder software or type the IP address directly in the address bar of your
Internet Explorer.

IP Address

The IP Address is necessary for network identification.

Subnet mask

Used to determine if the destination is in the same subnet. The

default value is 255.255.255.0.

Default gateway

Used to forward frames to destinations on different subnets

or for internet access.

Primary DNS

The primary domain name server that translates hostnames into

IP addresses.

Secondary DNS

A secondary domain name server that backups the primary

DNS.

Web Server port

Defines the port that Internet Explorer uses to connect over

the web and view video. If this port is changed then the new port must be defined
when attempting to web connect (ex: if your camera’s IP address is
192.168.0.100 and you change the web port to 8001, then you must type
http://192.168.0.100:8001 in your browser).

RTSP port

The default RTSP port is 554; setting range: 1024 ~65535.

MJPEG over HTTP port

The default HTTP Port is 8008; setting range: 1024

~65535.

HTTPS port

The default HTTPS Port is 443; setting range: 1024 ~65535.

No port number can be used in duplication on more than one item.

Advertising
This manual is related to the following products: