REMKO Multi-talent Plus - Manual (Page 4)

REMKO Heat Pump Manager
Safety notes
Warranty
A prerequisite for any warranty
claims is that the enclosed "war-
ranty registration card" was com-
pletely filled out and returned to
REMKO GmbH & Co. KG by the
buyer or his agent immediately fol-
lowing purchase or commissioning.
The warranty conditions are listed
in the "General terms and condi-
tions". Special agreements can
furthermore only be agreed be-
tween the contract partners. Please
contact your contract partner
directly about this.
Disposal of packaging
All products are packed for trans-
port in environmentally compat-
ible materials. To avoid waste and
sustain raw materials, dispose of
packaging only at appropriate col-
lection points.
Disposal of equipment and
components
The equipment and com-
ponents have been manu-
factured from recyclable materials
only.
Help protect the environment by
ensuring that the equipment or
components (for example bat-
teries) are not disposed of with
household waste but in an envi-
ronmentally acceptable manner
in accordance with applicable
regulations, e.g. using authorised
disposal and recycling specialists or
municipal collection points.
Environmental
protection
and recycling
The equipment is shipped in sturdy
transport packaging. Please inspect
the equipment immediately upon
delivery. Note any damage or miss-
ing parts on the delivery note and
inform the forwarding agent and
your contract partner. Warranty
claims at a later date will not be
accepted.
Transport and
packaging
Read the operating instructions
carefully before commissioning the
equipment. They provide useful
tips and information as well as
warnings to prevent endangering
persons and property . Failure to
follow the directions in this man-
ual can result in endangerment to
persons, the environment and the
equipment itself and will void any
claims for liability.
■ Keep this manual close to the
equipment.
■ Modification of equipment and
components supplied by REM-
KO is not permitted and can
cause malfunctions.
■ Operating equipment
or components with obvious
defects or damage is not permit-
ted.
■ Repairs may only be carried out
by authorised personnel, while
cleaning may be carried out by
the operating company.
■ The equipment or components
are not to be exposed to any
mechanical stresses, extreme
levels of humidity or direct
sunlight.
Intended use
Depending on the model, the
equipment and the additional
fittings with which it is equipped
is only intended to be used as an
air-conditioner for the purpose of
cooling or heating the air in an
enclosed room.
Different or additional use shall not
be classed as intended use. The
manufacturer/supplier assumes no
liability for damages arising from an
unintended use of the equipment.
The user bears the sole risk in such
cases.
Using the equipment as intended
also includes working in accord-
ance with the operating manual
and installation instructions and
complying with the maintenance
requirements.
4