Seaward Test n Tag Printer - Manual (Page 27)

26
Transfer
To send the Logo and/or Label Title to the tester ensure the correct
Com Port is set then press the Transfer… button. Put the tester into
REMOTE MODE (see tester Instruction Manual) then select OK. The
logo together with a label title (if required) will then be transferred into
the tester.
Note
The Logo stored in the tester can be protected by a Password if this
has been evoked in the tester (see the tester Instruction Manual). To
maintain security; had a password been set in the tester, on starting
the transfer the Tester Logo Transfer program will request this
password before proceeding.