Smithy Midas 1220 XL - Manual (Page 111)

X-Axis Travel (w/tailstock installed) 15”
Y-Axis Travel 7-3/8”
Mill Specifications
Column Diameter 3-1/8”
Dial Calibration Drill-Coarse Feed 0.042”
Dial Calibration Mill-Fine Feed 0.042”
Drawbars Size (included) 12 mm, 3/8”
Drill Chuck Size (included) 1/2”
Drill Chuck Arbor Size (included) MT3/JT33
Feed Rates N/A
Head Rotation 360 Degrees
Head Travel 3-1/4”
Quill Diameter 2-3/4”
Quill Travel 3-5/8”
Spindle Center to Front of Chuck 3-3/16”
Spindle Center to Lathe Spindle Flange 5-1/2”
Spindle Center to Support Column 6-7/8”
Spindle to Table Distance(min-max) 6-1/4” - 13”
Spindle Speeds 12 (125-1600 rpm)
Spindle Taper MT3
Tool Size Limits 1”
X-Axis Travel 6-5/8”
Y-Axis Travel 7-3/8”
Electrical
Amperage 11 amps
Horsepower 3/4 hp
Motor Type A/C
Phase Single
Voltage 110 Volts A/C
Full Specifications
26-2 Or Visit www.smithy.com