Smithy Midas 1220 XL - Manual (Page 28)

Oiling the Leadscrew
1.
Put oil in the oil buttons in the left trestle.
2.
Put oil in the support for the right end of the leadscrew (figure 6.9).
Figure 6.9 Oil the support for the right end of the leadscrew.
3.
Put a few drops of oil along the leadscrew and feed shaft.
Oiling the Compound
1.
Put oil in the two buttons on the top.
Oiling the Mill/Drill Clutch
1.
Put oil in the button on top of the clutch housing (Figure 6.10).
Figure 6.10 Oil the clutch-housing button.
To keep your machine in peak condition, lubricate it daily after removing any debris.
6-7
For Assistance: Call Toll Free 1-800-476-4849
Midas 1220 XL Operator’s Manual