Smithy Midas 1220 LTD User Manual
Page 25
Advertising
Put oil on the button at the back of the cross slide.
Oiling the Leadscrew
Put oil in the oil buttons on the left trestle.
Put oil in the support for the right end of the leadscrew.
Oiling the Tailstock
Figure 5.9 Oil the two buttons on the top of the tailstock.
Oil the buttons on top of the tailstock.
Oiling the Mill/Drill Clutch
Figure 5.10 Oil the clutch housing button.
Put oil in the button on top of the clutch housing.
Notice
To keep your machine in peak condition, lubricate it daily after removing any debris.
Do not fill the gearbox sight glass more than half way. Too much oil will make the
motor lug and sling oil out form behind the chuck and inside the belt box.
5: Uncrating and Setting Up the MI-1220 LTD
5-6
Or Visit www.smithy.com
Advertising