Smithy Midas 1220 LTD - Manual (Page 71)

Figure 15.2 Slide the B and C gear shaft until the C gear meshes with the D gear
8. Place the selected A gear, flange side in, on the A gear shaft and replace the C clip.
9. Swing the bracket assembly until the A and B gears mesh. Hold the bracket assembly
in place and tighten the bolt. Make sure the gears turn smoothly before engaging the
powerfeed. You may need to make some adjustments.
10. Engage the E gear between the C and D gears to reverse the leadscrew.
Figure 15.3 Engage the E gear between the C and D gears to reverse the leadscrew.
15: Changing Gears on your MI-1220 LTD
15-2 Or Visit www.smithy.com