SOMFY SONESSE 30 RTS - Manual (Page 73)

QUICK PROGRAMMING FOR OUTDOOR SUNIS WIREFREE SENSOR
STEP 1: Place Sunis in a
charge for 10 minutes. sunny area to
STEP 2: awning.
Then press the PROGRAMMING BUTTON
on the back of the original remote using
a paper clip, pen or similar device until
the awning jogs.
Completely retract the
STEP 3: PROGRAMMING BUTTON
on the back of the Sunis until the
awning jogs.
Press the
STEP 4: on the
Sunis completely counter clockwise and
allow direct sunlight to shine on the front
for 2 minutes.
Turn intensity knob
The awning should extend. Make adjustments to the sensitivity and
in the path of direct sunlight. mount it
70