Super Systems HP2000 With 9100 Controller - Manual (Page 5)

Screen 1: Oxygen (in %), Probe mV and Probe Temperature
This screen is the default screen for the HP2000. This screen lists the percentage of oxygen on
the left of the screen, the probe temperature (in Fahrenheit or Celsius, depending on the
configuration) on the top right of the screen, and the probe millivolts on the bottom right of the
screen. The values on this screen cannot be modified by the user. Pressing the Next button will
display the next screen, Oxygen (in ppm), Probe mV and Probe Temperature. Pressing the Prev
button will display the previous screen, Information Screen #2.
Screen 2: Oxygen (in ppm), Probe mV and Probe Temperature
This screen will display the oxygen in parts per million on the left of the screen, the probe
temperature (in Fahrenheit or Celsius, depending on the configuration) on the top right of the
screen, and the probe millivolts on the bottom right of the screen. The values on this screen
cannot be modified by the user. Pressing the Next button will display the next screen,
Temperature Set Point. Pressing the Prev button will display the previous screen, Oxygen (in
%), Probe mV and Probe Temperature. Pressing the CLR button at any time will return the user
to the first screen.
Screen 3: Temperature Set Point