Tech Source GFX 400 Series - Manual (Page 18)

GFX 400 Series Installation and Reference Manual
3-6
‘t’
puts a test pattern on the entire
display (hit any key to return to
the main screen)
‘s’
saves current settings and exits
‘h’
help
‘q’ exits the program without saving
any changes
NOTE: To enable the dual screen feature (GFX 450 only),
select the “sync” menu and enter “w”. Please see Section
3.5 for a description of this feature.
Figure 3.1 - GFX 400 Configuration Utility
3.4.2 Non-Interactive Configuration
Sometimes it is convenient to configure the GFX 400 card non-
interactively. This method is especially useful when configuring
many systems identically or when the appropriate configuration
for the system is already known.