Tech Source GFX 400 Series - Manual (Page 50)

GFX 400 Series Installation & Reference Manual
B-4
B.4 GFX 400 Series Cabling
B.4.1 GFX 450
GFX 450 has one DVI-I and one HD-15 connector. The DVI-I
connector supports both analog and DVI output. Therefore,
connect the appropriate cable depending on your monitor type.
The HD-15 supports analog video only.
B.4.2 GFX 420 and GFX 440
Both of these cards have LFH60 connectors for video output and
require special splitter cables. Detailed descriptions for
connecting various monitors are provided in the sub sections
below.
Attach the GFX 400 Series dual-monitor adapters (splitter
cables) to the connectors on the bracket of your GFX 400 Series
card. Make sure the connectors are firmly in place. The other
end of each adapter has DV I connectors to plug into each of the
two displays. Please refer to illustrations in Figures B.1 and B.2.
B.4.2.1 Digital Monitors
The supplied dual-monitor adapter supports digital LCD flat
panel displays with a DVI interface. These displays must have a
DVI-D or DVI-I input connector. Refer to Figure B.1 for an
illustration. Connect the LCD’s video cable to one of the two
connectors of the dual monitor adapter.