Teo E911 Response System Installation - Manual (Page 48)

Teo E911 Response Server 9145 Installation Instructions
Page 48 13-280133 Rev. C
Multiple E911 Calling Numbers can share common customer site information (e.g. street
address) to streamline data entry for ALI Data Exchange. Individual “E911 Dispatch
Locations” within a site can be assigned to unique “E911 Calling Numbers” from the
site. “E911 Dispatch Location” descriptions can be used to direct emergency responders to
an interior location or zone (such as room or floor number) within a building or campus
site.
To edit customer dispatch locations:
1. Click the Dispatch Info tab.
2. If the customer is not listed in the table, add the customer before proceeding
3. Click the customer in the table. A list of E911 Calling Numbers and E911 Dispatch
Locations will appear below the customer's Name, Main Number, and Address.
4. Click in an E911 Calling Number (ANI) field to edit, or click a blank field at the end of
the list to create a new entry. E911 Calling Numbers must be 7 digits for the 9135,
and 10 digits for the 9145.
5. Click in an E911 Dispatch Location field to enter or edit a location description (50
characters max.).
To delete customer dispatch locations:
1. Click anywhere in the dispatch table line that you want to delete (do not double-click
to edit a field).
2. Hold down Ctrl while clicking if you want to select multiple locations; hold down
Shift to select a contiguous block.
3. Press Delete.