Visara CNA-8000 Installation - Manual (Page 41)

CNA-8000 Installation and Configuration
707158-003 2-19
Activating a Stored Configuration
Press the [Activate] button next to the name of the configuration that you need to
activate. A message will display to advise you that you must restart the server after
completing the activation. You may press [OK] to proceed with the activation process or
press [Cancel] to abort the process.
Pressing the [OK] button copies the stored configuration file to be the current
configuration file, but does not operationally change how the server is functioning (it is
still running on the configuration that it was booted on). This allows you to make changes
to any of the stored configurations, without affecting current operations. You must
manually restart or reboot the server to make the activated configuration operational.
If you have not saved the current configuration prior to activating a previously saved
configuration, your current configuration will be lost.
Saving the Current Configuration to a USB Drive
You can copy the Current Configuration file to a USB drive. Note that you can copy any
of your saved configurations to a USB drive by first making the saved configuration the
Current Configuration, then pressing the [Copy to USB] button. Just remember that if
you have made changes to your running configuration, you will want to save that prior to
making another configuration the Current Configuration or you will lose those changes.
To copy your Current Configuration to a USB drive, just insert the USB drive into the
socket, and press the [Copy to USB] button. You should see confirmation that the copy
was successful on your screen.