Visara CNA-8000 Installation - Manual (Page 66)

Chapter 5. Token Ring Gateway
5-2 707158-003
The resulting panel should appear similar to the one shown below.
Field Definitions
Configure Token Ring Line: This dropdown control allows you to select a different
Token Ring card to configure if there is more than one installed.
Line ID: This is the name that you choose to use for the Token Ring interface.
Mac Address: This field indicates the MAC address assigned to this Token Ring
interface. If the ‘Use Burned in MAC Address’ option is selected this field will display
the hardware assigned MAC address and the field will be grayed out so that you can not
change the value. If the option is not selected, then you may enter a locally-administered
MAC address value in the form of 6 hex bytes separated by colons.
Example: 40:00:30:74:00:01
Use Burned in MAC Address: This option allows you to use the unique factory
assigned MAC address when selected. Selecting this option will cause the burned in
address to be displayed and used.